Home
Pricing
Gunsmithing
Options
Philosophy
Ordering
Contact Us

 

 

 


(Above) TBA M40A1 USMC STANDARD RIFLE with optional new Unertl 10X Scope.  Stock is McMillan’s smooth (unstippled) general purpose hunting (HTG). Rifle shown has the standard 24” heavy barrel, Wichita Engineering swivels and .6” Pachmayer recoil pad.


The Marine Corps’ M40A1 is still considered by many to be simply the best tactical long range rifle for many reasons. McMillan’s General Purpose Hunting stock handles well and the reduced size and weight of the stock is preferred over many of the other types of stocks found on other tactical rifles. The M40A1 is well suited for “every clime and place” as demonstrated in Iraq, Afghanistan, and many world wide conflicts since its adoption. Although the new M40A3 was introduced as a replacement for the M40A1, the A1 is still the preferred rifle for many Marine snipers and the Corps continues to build new A1 rifles as well as refurbish and re-issue current inventory.

Specs:
  • TBA Remington 700 Barreled Action with 24" or 26", 12" Twist, S/S Sniper Taper BarrelUSMC Standard, Krieger or Mike Rock
  • Smooth (or stipled) McMillan General Purpose Hunting Sock in epoxy molded Forest Camo (other colors available)
  • Receiver is Clip Slotted and “U.S.” marked, drilled and tapped for iron sight bases
  • “7.62 NATO” marked barrel
  • Blackened Steel Machined Follower
  • Blackened Firing Pin Indicator
  • USMC modified Winchester M70 Hinged Floorplate and Trigger Guard
  • Parts stamped with last four numerals of receiver serial number
  • Unertl type scope mount with lugs, 30mm or 1” rings
  • .60” Pachmayer Brown Pad, optional length of pull
  • 1-1/2” Heavy Gauge Wichita Engineering Sling Swivels
  • Old style trigger assembly with dual sear, bolt lock, and machined safety head available at extra cost (ask about it)
  • All metal parts are finished with TBA’s matte black Dura-Coat® coating
  • Weight is approximately 14 lbs. without scope
Left side view of new Unertl 10X and TBA USMC M40A1 STANDARD RIFLE.   Note cutout at rear of
USMC scope mount made specifically for the Unertl scope’s large eyepiece, allowing telescope to be mounted low to receiver.   New commercial machined steel Unertl scope has the “T” series serial number and weighs 2.5 lbs.  Receiver is “U.S.” marked and barrel is marked “7.62 NATO”. 

 

(Above)TBA M40A1 .22 Long Rifle option with Leupold MK4 M1 telescope.
Specs:
  • Ruger 77/22 action with 10 shot rotary magazine
  • Any McMillan Stock in epoxy molded color of your choice
  • Match chamber cut with special short throat reamer with minimun dimensions
  • Receiver “U.S.” marked, drilled and tapped for iron sight bases
  • Shilen .22 long rifle stainless steel match barrel turned to Marine sniper contour
  • Recoil lug assembled to appear like Remington 700
  • Bolt knob has checkered panels similar to Rem 700 bolt
  • Blackened Firing Pin Indicator
  • Unertl type scope mount with rear lug to fit Ruger 77/22 receiver, 30mm or 1” rings
  • .60” Pachmayer Brown Pad, optional length of pull
  • 1-1/2” Heavy Gauge Wichita Engineering Sling Swivels
  • Standard Ruger 77/22 factory trigger
  • All metal parts are finished with TBA’s matte black moly-teflon coating
  • Weight is approximately 15 lbs without scope

PRICE: See current price listing

 

Home  |  Pricing  |  Gunsmithing  |  Options  |  Philosophy  |  Ordering  |  Contact Us

 

Texas Brigade Armory, 34280 N. State Hwy 108, Mingus, TX 76463
Mike Lau, President    Phone: 254.968.5894 

Copyright © 2005. All Rights Reserved.